CFE-1/2-N-B Cam Follower With Eccentric Studs

Tightening Method:Standard Type; Shaft:Provided; Roller Guiding Method:Retainer Type; B:12; RoHS:6; Allowable Rotational Speed(rpm):11900; Application:General; Basic Load Rating Cor (Static)(kN):6.78; Roller Lining:None; Unit:Metric Series;

Inventory:0.0; Brand:NTN; Min operating temperature, Tmin:-25 °C; Da max:88.5 mm; Category:Bearings; Mass:0.41 kg; Nlim (grease):7,000 rpm; Characteristic inner ring frequency, BPFI:7.93 Hz; Max operating temperature, Tmax:110 °C; Static load, C0:23.2 kN;

Shape:T-Shaped; Seals:DD (Contact Rubber S; Bearing Retained:No; Number of Bearings:Double; Height Indication:Height Selection; Holder Surface Treatment:Not Provided; Bearing I.D. d(mm):25; RoHS:6; Height H(mm):40 ～ 80; Mount Type:Key Groove Type;

Recommended tightening torque for set screw:8 Nm; T min.:-20 °C; s1:39.7 mm; C:31.85 kN; Designation of bearing:EX209-27G2L4; N1:29 mm; G:R1/8"; C0:20.8 kN; H:54 mm; d:42.86 mm;

d:500.000 mm; Y1 - ISO Factor5:6.15; Cage Material:Brass; e - ISO Factor3:0.16; D:670.000 mm; Bearing Weight:125.700 Kg; C0 - Static Radial Rating:6060000 N; Reference Thermal Speed Rating (Grease):520; R - Inner Ring To Clear Radius1:4.000 mm; Reference Thermal Speed Rating (Oil)7:610;

Fit:J7; Fit:J7; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Diamond Flange Shape; Unit Body Material:Cast Iron; d:65; Stroke:No; Surface Treatment:No; Unit, Type:Insert Bearing Unit;

Ca90 - Dynamic Thrust Rating (90 million revolutions)7:36800 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:413000 lbf; R - Cone Backface To Clear Radius3:0.13 in; a - Effective Center Location4:2.15 in; d:27.5000 in; G2 - Heat Generation Factor (Rib-Roller End):2090.8; K - Factor8:1.67; C1 - Dynamic Radial Rating (1 million revolutions)6:237000 lbf; Cg - Geometry Factor:0.274; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:107000 lbf;

Ca90 - Dynamic Thrust Rating (90 million revolutions)7:36800 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:413000 lbf; R - Cone Backface To Clear Radius3:0.13 in; a - Effective Center Location4:2.15 in; d:27.5000 in; G2 - Heat Generation Factor (Rib-Roller End):2090.8; K - Factor8:1.67; C1 - Dynamic Radial Rating (1 million revolutions)6:237000 lbf; Cg - Geometry Factor:0.274; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:107000 lbf;

Designation of closed end cover:SCC211; A5:33.4 mm; S:22.2 mm; Z:76.8 mm; A2:38 mm; B:55.6 mm; Designation of open end cover:SCOU211-35; A:64 mm; L1:106 mm; A1:22 mm;

Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Holder Surface Treatment:Not Provided; RoHS:6; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Housing Material:304 Stainless Steel; Shape:Flange Type; Flange Shape:Round Type;

Ca90 - Dynamic Thrust Rating (90 million revolutions)7:36800 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:413000 lbf; R - Cone Backface To Clear Radius3:0.13 in; a - Effective Center Location4:2.15 in; d:27.5000 in; G2 - Heat Generation Factor (Rib-Roller End):2090.8; K - Factor8:1.67; C1 - Dynamic Radial Rating (1 million revolutions)6:237000 lbf; Cg - Geometry Factor:0.274; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:107000 lbf;

Type:Bearings with Housin; Bearing I.D. d(mm):20; Shape:Flanged Pilot Type; Volume Discount:Available; Shape:Flanged Pilot Type; Number of Bearings:Double; Width T(mm):50; Flange O.D. H(φ):62; Seals:DD (Contact Rubber S; Bearing Retained:No;

Bearing Material:[Steel] Steel; Type:Bearings with Housin; Shape:T-Shaped; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Width T(mm):19; Number of Bearings:Single; Housing Material:304 Stainless Steel; Bearing I.D. d(mm):17; Lateral Width L(mm):76;

Fit:J7; RoHS:6; Bearing Unit, Type:Square flange shape; Seal:Silicone; Stroke:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Surface Treatment:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Diameter series symbol:For Heavy Load;

Seals:VV (Non-Contact Rubb; Shape:Flange Type; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Width T(mm):11; Bearing Used:Deep Groove Ball Bea;