Four Row Tapered Roller Bearings Singapore CRO-12604

Designation of housing:PH207-; Weight:2.4 kg; Designation of bearing:EX207G2L3; H2:140 mm; J:127 mm; T max.:100 °C; C0:15.2 kN; Recommended tightening torque for set screw:11.5 Nm; A1:30 mm; L:167 mm;

Rolling Element Material:Steel; Series:No Inner Wheel; Inner/Outer Ring Material:Steel; Outer Ring Type:Flat; Raceway Ring Shape:Needle Roller; B:26; D:115; Outer Ring:With Outer Ring; RoHS:6; Raceway Ring Shape:Needle Roller;

Recommended tightening torque for set screw:11.5 Nm; A1:39 mm; Designation of bearing:ES210G2T20; T max.:200 °C; H1:22 mm; C0:23.2 kN; H2:114 mm; Designation of housing:P210-; T min.:-20 °C; B:30.2 mm;

T max.:100 °C; A1:18 mm; H:258 mm; d1:86 mm; s1:57.6 mm; Designation of housing:FLE213-; A2:85.6 mm; Designation of bearing:EX213-40G2L3; d:63.5 mm; J:216 mm;

Recommended tightening torque for set screw:11.5 Nm; A1:39 mm; Designation of bearing:ES210G2T20; T max.:200 °C; H1:22 mm; C0:23.2 kN; H2:114 mm; Designation of housing:P210-; T min.:-20 °C; B:30.2 mm;

Shape:Flange Type; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):10; Type:Bearings with Housin; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Flange O.D. H(φ):50; Shape:Flange Type; Number of Bearings:Single;

Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:2.030 mm; d:24.000 mm; G1 - Heat Generation Factor (Roller-Raceway):13.3; a - Effective Center Location4:-8.9 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:79500 N; B - Cone Width:25.000 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:8070 lbf; Cg - Geometry Factor:0.0592; Series:HM33400;

Da - Cup Frontface Backing Diameter:3.82 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:10800 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:41500 lbf; Design Units:Imperial; Cup Part Number:28921D; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:4500 lbf; db - Cone Backface Backing Diameter:2.95 in; Y1 - ISO Factor9:1.59; Y2 - ISO Factor10:2.36; Cone Part Number:28995;

Mass:0.45 kg; Characteristic inner ring frequency, BPFI:5.91 Hz; Characteristic cage frequency, FTF:0.41 Hz; ra max:1 mm; Characteristic rolling element frequency, BSF:5.33 Hz; Da max:83.5 mm; da max:60 mm; Min operating temperature, Tmin:-25 °C; Static load, C0:23.2 kN; Characteristic outer ring frequency, BPF0:4.09 Hz;

Mass:0.45 kg; Characteristic inner ring frequency, BPFI:5.91 Hz; Characteristic cage frequency, FTF:0.41 Hz; ra max:1 mm; Characteristic rolling element frequency, BSF:5.33 Hz; Da max:83.5 mm; da max:60 mm; Min operating temperature, Tmin:-25 °C; Static load, C0:23.2 kN; Characteristic outer ring frequency, BPF0:4.09 Hz;

Surface Treatment:No; Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):71500; Diameter series symbol:Medium Load; Bearing Unit, Type:Take-Up Type; Fit:J7; Bearing Inner Dia. Shape:Tapered hole adapter; Seal:Silicone; Unit, Type:Insert Bearing Unit; Surface Treatment:No;

Mass:0.45 kg; Characteristic inner ring frequency, BPFI:5.91 Hz; Characteristic cage frequency, FTF:0.41 Hz; ra max:1 mm; Characteristic rolling element frequency, BSF:5.33 Hz; Da max:83.5 mm; da max:60 mm; Min operating temperature, Tmin:-25 °C; Static load, C0:23.2 kN; Characteristic outer ring frequency, BPF0:4.09 Hz;

Number of Raceway Ring Rows:Single Row; Bearing Style:Open Type; Type:Angular Contact Ball; Rolling Element Material:Steel; Retainer Type:Punching; Load Direction:Radial; d:55; Inner/Outer Ring Material:Steel; Accuracy Symbol:P5; Outer Ring Shape:Flat;

Shape:Flange Type; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):10; Type:Bearings with Housin; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Flange O.D. H(φ):50; Shape:Flange Type; Number of Bearings:Single;

Surface Treatment:No; Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):71500; Diameter series symbol:Medium Load; Bearing Unit, Type:Take-Up Type; Fit:J7; Bearing Inner Dia. Shape:Tapered hole adapter; Seal:Silicone; Unit, Type:Insert Bearing Unit; Surface Treatment:No;