DOUBLE ROW TAPERED ROLLER BEARINGS JAPAN BRAND 1200KDH1501

T min.:-20 °C; G1:M24; H:90 mm; A:32 mm; C:25.7 kN; d:36.51 mm; L3:40 mm; B:42.9 mm; T max.:100 °C; Designation of housing:EHE207-;

T min.:-20 °C; G1:M24; H:90 mm; A:32 mm; C:25.7 kN; d:36.51 mm; L3:40 mm; B:42.9 mm; T max.:100 °C; Designation of housing:EHE207-;

Characteristic outer ring frequency, BPF0:4.44 Hz; rs min:1.5 mm; Characteristic inner ring frequency, BPFI:6.56 Hz; b max:3 mm; Minimum Buy Quantity:N/A; Da max:92 mm; d1:64 mm; d:45 mm; D:100 mm; r1s min:1.5 mm;

Basic Load Rating, Dynamic Rating(N):67400; Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:With steel plate cov; Machining:No; Diameter series symbol:Used for Light load; Unit Body Material:Cast Iron; Days to Ship:9 Days; Bearing Unit, Type:Round flange shape; Bearing Inner Dia. Shape:Tapered hole adapter; Unit, Type:Insert Bearing Unit;

A2:36 mm; Designation of bearing:UC306G2; L:125 mm; A:32 mm; G:M6x1; T min.:-20 °C; s1:21.5 mm; e:10 mm; H3:90; C:27 kN;

Characteristic outer ring frequency, BPF0:4.44 Hz; rs min:1.5 mm; Characteristic inner ring frequency, BPFI:6.56 Hz; b max:3 mm; Minimum Buy Quantity:N/A; Da max:92 mm; d1:64 mm; d:45 mm; D:100 mm; r1s min:1.5 mm;

Precision Grade Symbol:No; Symbol of contact angle:No; Raceway Ring Shape:Tapered Roller; Specifications:Standard; Outer Ring:With Outer Ring; Specifications:Standard; Size Standards:Metric System; Retainer Type:Punching; Number of Raceway Ring Rows:Single Row; Symbol of Bearing Ring Shape:No;

Bearing Unit, Type:Take-Up Type; Fit:J7; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter; Rolling Element Material:Bearing Steel; Stroke:No; Unit Body Material:Cast Iron; Machining:No; Seal:Nitrile; Accessory:With steel plate cov;

Bearing Unit, Type:Take-Up Type; Fit:J7; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter; Rolling Element Material:Bearing Steel; Stroke:No; Unit Body Material:Cast Iron; Machining:No; Seal:Nitrile; Accessory:With steel plate cov;

r - Cup Backface To Clear Radius2:0.130 in; Y2 - ISO Factor10:2.47; C - Cup Width:1.4375 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:206000 lbf; D:12.875 in; Cage Type:Stamped Steel; R - Cone Frontface To Clear Radius1:0.060 in; e - ISO Factor8:0.41; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:30700 lbf; da - Cone Frontface Backing Diameter:9.84 in;

s1:36.95 mm; L3:95 mm; A:64 mm; T max.:100 °C; N1:25 mm; A5:20.5 mm; A2:38 mm; A1:22 mm; SW:5 mm; T min.:-20 °C;

Basic Load Rating, Dynamic Rating(N):67400; Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:With steel plate cov; Machining:No; Diameter series symbol:Used for Light load; Unit Body Material:Cast Iron; Days to Ship:9 Days; Bearing Unit, Type:Round flange shape; Bearing Inner Dia. Shape:Tapered hole adapter; Unit, Type:Insert Bearing Unit;

Precision Grade Symbol:No; Symbol of contact angle:No; Raceway Ring Shape:Tapered Roller; Specifications:Standard; Outer Ring:With Outer Ring; Specifications:Standard; Size Standards:Metric System; Retainer Type:Punching; Number of Raceway Ring Rows:Single Row; Symbol of Bearing Ring Shape:No;

Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Number of Bearings:Double; Number of Bearings:Double; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Holder Surface Treatment:Electroless Nickel P; Shape:Flanged Pilot Type; Flange O.D. H(φ):72;

Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Number of Bearings:Double; Number of Bearings:Double; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Holder Surface Treatment:Electroless Nickel P; Shape:Flanged Pilot Type; Flange O.D. H(φ):72;