TAPERED ROLLER THRUST BEARINGS JAPAN 130TTF2501

Dz:60 mm; L:95 mm; C:14 kN; d:25 mm; A:30 mm; A1:11 mm; T min.:-20 °C; s1:13.5 mm; S:7.5 mm; T max.:100 °C;

G:M6x1; T min.:-20 °C; A5:19.7 mm; SW:3.18 mm; B:34 mm; L1:62 mm; L:97 mm; s1:17 mm; H1:76 mm; H:89 mm;

d1:74.5 mm; Dz:110 mm; A2:38 mm; L:171 mm; Designation of housing:T211N-; L2:19 mm; A1:22 mm; d:55 mm; s1:48.4 mm; N2:64 mm;

A2:60 mm; J:177 mm; H:230 mm; A1:18 mm; N:25mm; C:53 kN; L:125 mm; G:M6x1; d:45 mm; T min.:-20 °C;

d1:74.5 mm; Dz:110 mm; A2:38 mm; L:171 mm; Designation of housing:T211N-; L2:19 mm; A1:22 mm; d:55 mm; s1:48.4 mm; N2:64 mm;

Cb min:4 mm; Y2:1.81; da max:26 mm; Fatigue limit load, Cu:4.8 kN; Characteristic inner ring frequency, BPFI:8.91 Hz; Da max:41.5 mm; db min:25.5 mm; rs min:1 mm; Characteristic outer ring frequency, BPF0:6.09 Hz; d:20 mm;

Types:16**/6*** series; Load Direction:Radial; Outer Ring Shape:With Retaining Ring; Rolling Element Material:Steel; Type:Ball; RoHS:6; Days to Ship:9 Days or more; Number of Raceway Ring Rows:Single Row; Basic Dynamic Load Rating(N):15900; Symbol of Bearing Ring Shape:NR;

G:M6x1; T min.:-20 °C; A5:19.7 mm; SW:3.18 mm; B:34 mm; L1:62 mm; L:97 mm; s1:17 mm; H1:76 mm; H:89 mm;

Fatigue limit load, Cu:2 kN; Dynamic load, C:62 kN; d:70 mm; Characteristic rolling element frequency, BSF:5.4 Hz; Mass:1.07 kg; da min:78 mm; Brand:NTN; f0:14.5; Characteristic outer ring frequency, BPF0:4.1 Hz; ra max:1.5 mm;

Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; Lateral Width L(mm):72; Bearing Retained:No; Housing Material:[Aluminum Alloy] Alu; Type:Bearings with Housin; C Chamfered:Not Provided; Holder Surface Treatment:Clear Anodize; Bearing Material:[Steel] Steel;

Y - ISO Factor9:0.74; da - Cone Frontface Backing Diameter:192.53 mm; G2 - Heat Generation Factor (Rib-Roller End):69.1; Db - Cup Backface Backing Diameter:281.94 mm; Cup Part Number:H936310; Ab - Cage-Cone Frontface Clearance:10.4 mm; Design Units:Imperial; R - Cone Backface To Clear Radius1:6.35 mm; C0 - Static Radial Rating:316000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:276000 lbf;

Designation of open end cover:SCO204-17; C0:6.65 kN; J:90 mm; S:12.7 mm; s1:15.5 mm; d:17 mm; A1:11 mm; Recommended tightening torque for set screw:5.5 Nm; B:31 mm; Dz:54 mm;

G:M6x1; T min.:-20 °C; A5:19.7 mm; SW:3.18 mm; B:34 mm; L1:62 mm; L:97 mm; s1:17 mm; H1:76 mm; H:89 mm;

L2:10 mm; C0:11.2 kN; S:15.9 mm; Designation of housing:T206-; B:38.1 mm; A:37 mm; T min.:-20 °C; H:102 mm; H2:56 mm; C:19.5 kN;

Cb min:4 mm; Y2:1.81; da max:26 mm; Fatigue limit load, Cu:4.8 kN; Characteristic inner ring frequency, BPFI:8.91 Hz; Da max:41.5 mm; db min:25.5 mm; rs min:1 mm; Characteristic outer ring frequency, BPF0:6.09 Hz; d:20 mm;