TAPERED ROLLER THRUST BEARINGS JAPAN 150TTF3001

Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; Lateral Width L(mm):72; Bearing Retained:No; Housing Material:[Aluminum Alloy] Alu; Type:Bearings with Housin; C Chamfered:Not Provided; Holder Surface Treatment:Clear Anodize; Bearing Material:[Steel] Steel;

Dz:60 mm; L:95 mm; C:14 kN; d:25 mm; A:30 mm; A1:11 mm; T min.:-20 °C; s1:13.5 mm; S:7.5 mm; T max.:100 °C;

Cb min:4 mm; Y2:1.81; da max:26 mm; Fatigue limit load, Cu:4.8 kN; Characteristic inner ring frequency, BPFI:8.91 Hz; Da max:41.5 mm; db min:25.5 mm; rs min:1 mm; Characteristic outer ring frequency, BPF0:6.09 Hz; d:20 mm;

G:M6x1; T min.:-20 °C; A5:19.7 mm; SW:3.18 mm; B:34 mm; L1:62 mm; L:97 mm; s1:17 mm; H1:76 mm; H:89 mm;

Dz:60 mm; L:95 mm; C:14 kN; d:25 mm; A:30 mm; A1:11 mm; T min.:-20 °C; s1:13.5 mm; S:7.5 mm; T max.:100 °C;

A2:60 mm; J:177 mm; H:230 mm; A1:18 mm; N:25mm; C:53 kN; L:125 mm; G:M6x1; d:45 mm; T min.:-20 °C;

Retainer Type:Punching; Bearing Style:Open Type; Type:Self-aligning ball; Rolling Element Material:Steel; Rolling Element Material:Steel; Basic Dynamic Load Rating(N):57500; Type:Self-aligning ball; Size Standards:Metric System; RoHS:6; Outer Ring Shape:Spherical Surface;

B:25 mm; T min.:-20 °C; G:M6x1; d:20 mm; A1:11 mm; J:64 mm; s1:12.5 mm; Dz:54 mm; A2:33 mm; A:25.5 mm;

A2:60 mm; J:177 mm; H:230 mm; A1:18 mm; N:25mm; C:53 kN; L:125 mm; G:M6x1; d:45 mm; T min.:-20 °C;

G:M6x1; T min.:-20 °C; A5:19.7 mm; SW:3.18 mm; B:34 mm; L1:62 mm; L:97 mm; s1:17 mm; H1:76 mm; H:89 mm;

Designation of open end cover:SCO204-17; C0:6.65 kN; J:90 mm; S:12.7 mm; s1:15.5 mm; d:17 mm; A1:11 mm; Recommended tightening torque for set screw:5.5 Nm; B:31 mm; Dz:54 mm;

L2:10 mm; C0:11.2 kN; S:15.9 mm; Designation of housing:T206-; B:38.1 mm; A:37 mm; T min.:-20 °C; H:102 mm; H2:56 mm; C:19.5 kN;

L2:10 mm; C0:11.2 kN; S:15.9 mm; Designation of housing:T206-; B:38.1 mm; A:37 mm; T min.:-20 °C; H:102 mm; H2:56 mm; C:19.5 kN;

Cb min:4 mm; Y2:1.81; da max:26 mm; Fatigue limit load, Cu:4.8 kN; Characteristic inner ring frequency, BPFI:8.91 Hz; Da max:41.5 mm; db min:25.5 mm; rs min:1 mm; Characteristic outer ring frequency, BPF0:6.09 Hz; d:20 mm;