Needle Roller Bearing Manufacture YB 1112 IKO

T min.:-20 °C; H:42.9 mm; d:30.16 mm; H2:83 mm; Designation of housing:SP206N-; J:121 mm; C:15.3 kN; A:48 mm; T max.:100 °C; Z:18 mm;

N:14mm; d1:62 mm; L:137 mm; B1:56.3 mm; S:21.4 mm; C:31.85 kN; Designation of housing:FE209N-; G:R1/8"; Designation of bearing:EX209G2; d:45 mm;

Transmitter Material:Steel; B:33; Type:Ball; Precision:Grade 0; Sealing Structure:Double Contact Seals; Bearing Ring Material:Steel; Basic Dynamic Load Rating Cr(N):92500; Size Standards:Metric System; Specifications, Environment:Standard; D:140;

Transmitter Material:Steel; B:33; Type:Ball; Precision:Grade 0; Sealing Structure:Double Contact Seals; Bearing Ring Material:Steel; Basic Dynamic Load Rating Cr(N):92500; Size Standards:Metric System; Specifications, Environment:Standard; D:140;

Unit, Type:Insert Bearing Unit; Unit Body Material:Cast iron made; Basic Load Rating Cor(KN):44.8; Basic Load Rating, Static Rating(N):45000; Machining:No; Seal Type:Standard; Grease Type:Standard Grease; Stroke:No; Pillow Type, Category:Standard; Unit, Type:Insert Bearing Unit;

Axial rigidity:50 N/µm; Axial displacement K Factor:1.54; B:16 mm; Fatigue limit load, Cu:0.86 kN; Mass:0.2 kg; rs min:1 mm; Nlim (grease):23,000 rpm; Preload value:0.38 kN; Contact angle α:15 °; d:30 mm;

Shape:T-Shaped; Type:Bearings with Housin; Height Indication:Height Selection; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Holder Surface Treatment:Electroless Nickel P; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Shape:T-Shaped;

Retainer Type:Punching; Size Standards:Metric System; d:15; Number of Raceway Ring Rows:Single Row; Precision:Grade 0; Type:Ball; Preload Mark:C3; Inner/Outer Ring Material:Steel; Specifications/Environment:Standard; Outer Ring Shape:Flat;

d:50 mm; Y1:3.1; Min operating temperature, Tmin:-20 °C; ra max:1 mm; e:0.21; da min:56.5 mm; Y2:4.7; B:20 mm; Brand:NTN; Nlim (grease):6,300 rpm;

T min.:-20 °C; H:42.9 mm; d:30.16 mm; H2:83 mm; Designation of housing:SP206N-; J:121 mm; C:15.3 kN; A:48 mm; T max.:100 °C; Z:18 mm;

A:48 mm; Weight:1.11 kg; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; C:19.5 kN; s1:19.05 mm; S:15.9 mm; B:38.1 mm; C0:11.2 kN; H2:83 mm;

A:48 mm; Weight:1.11 kg; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; C:19.5 kN; s1:19.05 mm; S:15.9 mm; B:38.1 mm; C0:11.2 kN; H2:83 mm;

A1:37 mm; G:M6x1; A:54 mm; B:49.2 mm; L1:60 mm; H:54 mm; C0:20.8 kN; J:146 mm; N1:23 mm; T min.:-20 °C;

Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):20; Bearing Retained:No; Flange Shape:Compact Type; RoHS:6; Shape:Flange Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days;

Axial rigidity:50 N/µm; Axial displacement K Factor:1.54; B:16 mm; Fatigue limit load, Cu:0.86 kN; Mass:0.2 kg; rs min:1 mm; Nlim (grease):23,000 rpm; Preload value:0.38 kN; Contact angle α:15 °; d:30 mm;