TDO Type roller bearing HH224340 HH224310CD

Size Standards:Metric System; Types:16**/6*** series; Basic Dynamic Load Rating(N):8200; Size Standards:Metric System; Seal, Shield Symbols:LLU; Preload Mark:CM; Type:Ball; Load Direction:Radial; Bearing Style:Rubber Sealed; Type:Ball;

Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; RoHS:6; Flange O.D. H(φ):44; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Number of Bearings:Double; Width T(mm):20;

Size Standards:Metric System; Types:16**/6*** series; Basic Dynamic Load Rating(N):8200; Size Standards:Metric System; Seal, Shield Symbols:LLU; Preload Mark:CM; Type:Ball; Load Direction:Radial; Bearing Style:Rubber Sealed; Type:Ball;

Designation of closed end cover:SCCE204; Weight:0.73 kg; A1:22.5 mm; Designation of housing:PLE204N-; Designation of open end cover:SCOE204-17; J:94.5 mm; H:31.8 mm; H2:63.7 mm; Dz:54 mm; N:11mm;

Designation of closed end cover:SCCE204; Weight:0.73 kg; A1:22.5 mm; Designation of housing:PLE204N-; Designation of open end cover:SCOE204-17; J:94.5 mm; H:31.8 mm; H2:63.7 mm; Dz:54 mm; N:11mm;

Designation of closed end cover:SCCE204; Weight:0.73 kg; A1:22.5 mm; Designation of housing:PLE204N-; Designation of open end cover:SCOE204-17; J:94.5 mm; H:31.8 mm; H2:63.7 mm; Dz:54 mm; N:11mm;

Designation of bearing:LK204G2H; C0:6.6 kN; A:18 mm; T max.:100 °C; A1:8 mm; d:20 mm; Designation of housing:FCE204-; L:100 mm; H3:62; Adapter sleeve reference:HLK2304;

Size Standards:Metric System; Types:16**/6*** series; Basic Dynamic Load Rating(N):8200; Size Standards:Metric System; Seal, Shield Symbols:LLU; Preload Mark:CM; Type:Ball; Load Direction:Radial; Bearing Style:Rubber Sealed; Type:Ball;

Size Standards:Metric System; Types:16**/6*** series; Basic Dynamic Load Rating(N):8200; Size Standards:Metric System; Seal, Shield Symbols:LLU; Preload Mark:CM; Type:Ball; Load Direction:Radial; Bearing Style:Rubber Sealed; Type:Ball;

Dynamic load, C:30.3 kN; Contact angle α:40 °; Fatigue limit load, Cu:1.05 kN; d:40 mm; D1:64.6 mm; Mass:0.37 kg; Nref:9,000 rpm; Radial clearance class:CN; Characteristic outer ring frequency, BPF0:5.94 Hz; D2:74.8 mm;

A1:16 mm; L1:87 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; Designation of housing:FA208-; G:M6x1; d:38.1 mm; C0:18.2 kN; T min.:-40 °C; J1:71 mm;

Aa - Cage-Cone Backface Clearance:0 in; e - ISO Factor8:0.36; d:10.5 in; K - Factor7:1.62; da - Cone Frontface Backing Diameter:11.06 in; R - Cone Frontface To Clear Radius1:0.060 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:50300 lbf; T - Bearing Width across Cups:4.2499 in; r - Cup Backface To Clear Radius2:0.130 in; Bearing Weight:63.8 lb;

A5:12.6 mm; Weight:1.64 kg; d1:27.2 mm; Designation of housing:SP203-205/40N-; L1:225 mm; B1:28.6 mm; Recommended tightening torque for set screw:5.5 Nm; SW:3 mm; H:78 mm; d:12 mm;

Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; RoHS:6; Flange O.D. H(φ):44; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Number of Bearings:Double; Width T(mm):20;

Bolt Size:4 x M24; Series Type:Medium Series; Bearing Number:MSE415BR; Bearing - Housing - Seal:MSE415BRH; Seal Type:Felt Seal; Dimension N:13.625 in; Shaft Size:4-15/16 in; Dimension V:0.1 in; Support Type:Round Flange; Maximum Speed:1600 rpm;