TDO Type roller bearing M231649 M231610CD

A5:12.6 mm; Weight:1.64 kg; d1:27.2 mm; Designation of housing:SP203-205/40N-; L1:225 mm; B1:28.6 mm; Recommended tightening torque for set screw:5.5 Nm; SW:3 mm; H:78 mm; d:12 mm;

A1:16 mm; L1:87 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; Designation of housing:FA208-; G:M6x1; d:38.1 mm; C0:18.2 kN; T min.:-40 °C; J1:71 mm;

Dynamic load, C:30.3 kN; Contact angle α:40 °; Fatigue limit load, Cu:1.05 kN; d:40 mm; D1:64.6 mm; Mass:0.37 kg; Nref:9,000 rpm; Radial clearance class:CN; Characteristic outer ring frequency, BPF0:5.94 Hz; D2:74.8 mm;

T max.:100 °C; SW:4.76 mm; d:57.15 mm; C:27 mm; r:1.5; C1:8.2 mm; B1:77.7 mm; C0:32.8 kN; B:61.8 mm; D:110 mm;

Size Standards:Metric System; Types:16**/6*** series; Basic Dynamic Load Rating(N):8200; Size Standards:Metric System; Seal, Shield Symbols:LLU; Preload Mark:CM; Type:Ball; Load Direction:Radial; Bearing Style:Rubber Sealed; Type:Ball;

A5:12.6 mm; Weight:1.64 kg; d1:27.2 mm; Designation of housing:SP203-205/40N-; L1:225 mm; B1:28.6 mm; Recommended tightening torque for set screw:5.5 Nm; SW:3 mm; H:78 mm; d:12 mm;

A1:16 mm; L1:87 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; Designation of housing:FA208-; G:M6x1; d:38.1 mm; C0:18.2 kN; T min.:-40 °C; J1:71 mm;

Designation of housing:SP203-205/40N-; Weight:1.62 kg; s1:11 mm; H2:41 mm; L1:225 mm; L:264 mm; Designation of open end cover:SCO202-15; T max.:100 °C; C0:4.78 kN; Z:42.1 mm;

Bolt Size:4 x M24; Series Type:Medium Series; Bearing Number:MSE415BR; Bearing - Housing - Seal:MSE415BRH; Seal Type:Felt Seal; Dimension N:13.625 in; Shaft Size:4-15/16 in; Dimension V:0.1 in; Support Type:Round Flange; Maximum Speed:1600 rpm;

A5:12.6 mm; Weight:1.64 kg; d1:27.2 mm; Designation of housing:SP203-205/40N-; L1:225 mm; B1:28.6 mm; Recommended tightening torque for set screw:5.5 Nm; SW:3 mm; H:78 mm; d:12 mm;

Aa - Cage-Cone Backface Clearance:0 in; e - ISO Factor8:0.36; d:10.5 in; K - Factor7:1.62; da - Cone Frontface Backing Diameter:11.06 in; R - Cone Frontface To Clear Radius1:0.060 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:50300 lbf; T - Bearing Width across Cups:4.2499 in; r - Cup Backface To Clear Radius2:0.130 in; Bearing Weight:63.8 lb;

Aa - Cage-Cone Backface Clearance:0 in; e - ISO Factor8:0.36; d:10.5 in; K - Factor7:1.62; da - Cone Frontface Backing Diameter:11.06 in; R - Cone Frontface To Clear Radius1:0.060 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:50300 lbf; T - Bearing Width across Cups:4.2499 in; r - Cup Backface To Clear Radius2:0.130 in; Bearing Weight:63.8 lb;

A1:16 mm; L1:87 mm; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; Designation of housing:FA208-; G:M6x1; d:38.1 mm; C0:18.2 kN; T min.:-40 °C; J1:71 mm;

T max.:100 °C; SW:4.76 mm; d:57.15 mm; C:27 mm; r:1.5; C1:8.2 mm; B1:77.7 mm; C0:32.8 kN; B:61.8 mm; D:110 mm;

T max.:100 °C; SW:4.76 mm; d:57.15 mm; C:27 mm; r:1.5; C1:8.2 mm; B1:77.7 mm; C0:32.8 kN; B:61.8 mm; D:110 mm;