ROLLING BEARINGS FOR STEEL MILLS LM778549DW-510-510D

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;

Unit, Type:Insert Bearing Unit; Stroke:No; Seal:Triple seals; Grease Type:Standard Grease; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Square flange shape; Days to Ship:8 Days; Fit:J7; Unit Body Material:Cast Iron; Diameter series symbol:Used for Light load;

Bearing Retained:Yes (with retaining; Volume Discount:Available; Width T(mm):35; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:6804; Days to Ship:7 Days; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;

Bearing Retained:Yes (with retaining; Volume Discount:Available; Width T(mm):35; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:6804; Days to Ship:7 Days; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;

Unit, Type:Insert Bearing Unit; Stroke:No; Seal:Triple seals; Grease Type:Standard Grease; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Square flange shape; Days to Ship:8 Days; Fit:J7; Unit Body Material:Cast Iron; Diameter series symbol:Used for Light load;

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;

G:R1/8"; Designation of bearing:UC206-20G2; Dz:70 mm; Recommended tightening torque for set screw:3.7 Nm; L1:225 mm; H:98 mm; C0:11.2 kN; L:274 mm; S:15.9 mm; Weight:1.99 kg;

Bearing Retained:Yes (with retaining; Volume Discount:Available; Width T(mm):35; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:6804; Days to Ship:7 Days; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;

End Cover1:EC519-616; N1:28 mm; Seal:VR316; Shaft Diameter db:90 mm; Bearing:21316; A:145.00 mm; Max Oil Speed:4100; H2:35.0 mm; Housing Mass:14 Kg; Seal Type:V-ring;

D:82.93 mm; ra max:3.5 mm; Max operating temperature, Tmax:120 °C; Mass:0.58 kg; r1a max:0.8 mm; Characteristic cage frequency, FTF:0.43 Hz; Y2:1.79; Fatigue limit load, Cu:12 kN; a:17.61 mm; Dynamic load, C:76 kN;

G:R1/8"; Designation of bearing:UC206-20G2; Dz:70 mm; Recommended tightening torque for set screw:3.7 Nm; L1:225 mm; H:98 mm; C0:11.2 kN; L:274 mm; S:15.9 mm; Weight:1.99 kg;

Bearing I.D. d(mm):20; Type:Bearings with Housin; Bearing Retained:No; Number of Bearings:Double; Width T(mm):35 ～ 70; Seals:VV (Non-Contact Rubb; RoHS:6; Flange Shape:Round Type; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize;

Bearing Retained:Yes (with retaining; Volume Discount:Available; Width T(mm):35; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:6804; Days to Ship:7 Days; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;

Bearing I.D. d(mm):20; Type:Bearings with Housin; Bearing Retained:No; Number of Bearings:Double; Width T(mm):35 ～ 70; Seals:VV (Non-Contact Rubb; RoHS:6; Flange Shape:Round Type; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize;