ROLLING BEARINGS FOR STEEL MILLS 479KV6751

D:82.93 mm; ra max:3.5 mm; Max operating temperature, Tmax:120 °C; Mass:0.58 kg; r1a max:0.8 mm; Characteristic cage frequency, FTF:0.43 Hz; Y2:1.79; Fatigue limit load, Cu:12 kN; a:17.61 mm; Dynamic load, C:76 kN;

F:26.5 mm; Inventory:0.0; Brand:NTN; rs min:1 mm; da max:26 mm; Min operating temperature, Tmin:-20 °C; Characteristic outer ring frequency, BPF0:4.29 Hz; r1s min:0.6 mm; db min:29 mm; B:18 mm;

End Cover1:EC519-616; N1:28 mm; Seal:VR316; Shaft Diameter db:90 mm; Bearing:21316; A:145.00 mm; Max Oil Speed:4100; H2:35.0 mm; Housing Mass:14 Kg; Seal Type:V-ring;

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;

B:51.6 mm; Designation of bearing:UC210-30G2T20; T min.:-20 °C; T max.:200 °C; C:35.1 kN; N:19mm; s1:25.8 mm; J:157 mm; C0:23.2 kN; e:22 mm;

Number of Bearings:Double; Shape:Flange Type; Bearing Material:[Steel] Steel; Bearing Retained:No; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Bearing Part Number:6002; Type:Bearings with Housin; Shape:Flange Type; Housing Material:304 Stainless Steel;

D:82.93 mm; ra max:3.5 mm; Max operating temperature, Tmax:120 °C; Mass:0.58 kg; r1a max:0.8 mm; Characteristic cage frequency, FTF:0.43 Hz; Y2:1.79; Fatigue limit load, Cu:12 kN; a:17.61 mm; Dynamic load, C:76 kN;

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;

N:12mm; G:M6x1; s1:19.05 mm; Z:27.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:FA206N-; L1:72 mm; H:144 mm; A1:14 mm; T min.:-20 °C;

T:23.81 mm; d1:59.5 mm; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:10.29 Hz; Characteristic cage frequency, FTF:0.43 Hz; D:79.38 mm; d:41.28 mm; Characteristic rolling element frequency, BSF:6.7 Hz; Y0:1.04; Rating life coefficient, A2:1.9;

B:51.6 mm; Designation of bearing:UC210-30G2T20; T min.:-20 °C; T max.:200 °C; C:35.1 kN; N:19mm; s1:25.8 mm; J:157 mm; C0:23.2 kN; e:22 mm;

Bearing Retained:Yes (with retaining; Volume Discount:Available; Width T(mm):35; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:6804; Days to Ship:7 Days; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;

B:51.6 mm; Designation of bearing:UC210-30G2T20; T min.:-20 °C; T max.:200 °C; C:35.1 kN; N:19mm; s1:25.8 mm; J:157 mm; C0:23.2 kN; e:22 mm;

Bearing Retained:Yes (with retaining; Volume Discount:Available; Width T(mm):35; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:6804; Days to Ship:7 Days; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;

Bearing Retained:Yes (with retaining; Volume Discount:Available; Width T(mm):35; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:6804; Days to Ship:7 Days; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;