ROLLING BEARINGS FOR STEEL MILLS 165KV2252

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;

B:51.6 mm; Designation of bearing:UC210-30G2T20; T min.:-20 °C; T max.:200 °C; C:35.1 kN; N:19mm; s1:25.8 mm; J:157 mm; C0:23.2 kN; e:22 mm;

B:51.6 mm; Designation of bearing:UC210-30G2T20; T min.:-20 °C; T max.:200 °C; C:35.1 kN; N:19mm; s1:25.8 mm; J:157 mm; C0:23.2 kN; e:22 mm;

B:51.6 mm; Designation of bearing:UC210-30G2T20; T min.:-20 °C; T max.:200 °C; C:35.1 kN; N:19mm; s1:25.8 mm; J:157 mm; C0:23.2 kN; e:22 mm;

Number of Bearings:Double; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing Material:[Steel] Steel; Days to Ship:8 Days; Width T(mm):40; Bearing Retained:No; Shape:Flange Type; Type:Bearings with Housin;

Unit, Type:Insert Bearing Unit; Stroke:No; Seal:Triple seals; Grease Type:Standard Grease; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Square flange shape; Days to Ship:8 Days; Fit:J7; Unit Body Material:Cast Iron; Diameter series symbol:Used for Light load;

Number of Bearings:Double; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing Material:[Steel] Steel; Days to Ship:8 Days; Width T(mm):40; Bearing Retained:No; Shape:Flange Type; Type:Bearings with Housin;

D:82.93 mm; ra max:3.5 mm; Max operating temperature, Tmax:120 °C; Mass:0.58 kg; r1a max:0.8 mm; Characteristic cage frequency, FTF:0.43 Hz; Y2:1.79; Fatigue limit load, Cu:12 kN; a:17.61 mm; Dynamic load, C:76 kN;

Bearing I.D. d(mm):20; Type:Bearings with Housin; Bearing Retained:No; Number of Bearings:Double; Width T(mm):35 ～ 70; Seals:VV (Non-Contact Rubb; RoHS:6; Flange Shape:Round Type; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize;

Bearing I.D. d(mm):20; Type:Bearings with Housin; Bearing Retained:No; Number of Bearings:Double; Width T(mm):35 ～ 70; Seals:VV (Non-Contact Rubb; RoHS:6; Flange Shape:Round Type; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize;

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;

B:51.6 mm; Designation of bearing:UC210-30G2T20; T min.:-20 °C; T max.:200 °C; C:35.1 kN; N:19mm; s1:25.8 mm; J:157 mm; C0:23.2 kN; e:22 mm;

B:51.6 mm; Designation of bearing:UC210-30G2T20; T min.:-20 °C; T max.:200 °C; C:35.1 kN; N:19mm; s1:25.8 mm; J:157 mm; C0:23.2 kN; e:22 mm;

B:51.6 mm; Designation of bearing:UC210-30G2T20; T min.:-20 °C; T max.:200 °C; C:35.1 kN; N:19mm; s1:25.8 mm; J:157 mm; C0:23.2 kN; e:22 mm;

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;