ROLLING BEARINGS FOR STEEL MILLS 280KV895

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;

T:23.81 mm; d1:59.5 mm; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:10.29 Hz; Characteristic cage frequency, FTF:0.43 Hz; D:79.38 mm; d:41.28 mm; Characteristic rolling element frequency, BSF:6.7 Hz; Y0:1.04; Rating life coefficient, A2:1.9;

F:26.5 mm; Inventory:0.0; Brand:NTN; rs min:1 mm; da max:26 mm; Min operating temperature, Tmin:-20 °C; Characteristic outer ring frequency, BPF0:4.29 Hz; r1s min:0.6 mm; db min:29 mm; B:18 mm;

Number of Bearings:Double; Shape:Flange Type; Bearing Material:[Steel] Steel; Bearing Retained:No; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Bearing Part Number:6002; Type:Bearings with Housin; Shape:Flange Type; Housing Material:304 Stainless Steel;

Bearing I.D. d(mm):20; Type:Bearings with Housin; Bearing Retained:No; Number of Bearings:Double; Width T(mm):35 ～ 70; Seals:VV (Non-Contact Rubb; RoHS:6; Flange Shape:Round Type; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize;

Number of Bearings:Double; Shape:Flange Type; Bearing Material:[Steel] Steel; Bearing Retained:No; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Bearing Part Number:6002; Type:Bearings with Housin; Shape:Flange Type; Housing Material:304 Stainless Steel;

T:23.81 mm; d1:59.5 mm; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:10.29 Hz; Characteristic cage frequency, FTF:0.43 Hz; D:79.38 mm; d:41.28 mm; Characteristic rolling element frequency, BSF:6.7 Hz; Y0:1.04; Rating life coefficient, A2:1.9;

End Cover1:EC519-616; N1:28 mm; Seal:VR316; Shaft Diameter db:90 mm; Bearing:21316; A:145.00 mm; Max Oil Speed:4100; H2:35.0 mm; Housing Mass:14 Kg; Seal Type:V-ring;

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;

s1:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; T max.:100 °C; J:95 mm; Weight:2.7 kg; C0:23.2 kN; Designation of housing:PG210N-; d:50 mm; B1:43.7 mm;

D:82.93 mm; ra max:3.5 mm; Max operating temperature, Tmax:120 °C; Mass:0.58 kg; r1a max:0.8 mm; Characteristic cage frequency, FTF:0.43 Hz; Y2:1.79; Fatigue limit load, Cu:12 kN; a:17.61 mm; Dynamic load, C:76 kN;

F:26.5 mm; Inventory:0.0; Brand:NTN; rs min:1 mm; da max:26 mm; Min operating temperature, Tmin:-20 °C; Characteristic outer ring frequency, BPF0:4.29 Hz; r1s min:0.6 mm; db min:29 mm; B:18 mm;

T:23.81 mm; d1:59.5 mm; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:10.29 Hz; Characteristic cage frequency, FTF:0.43 Hz; D:79.38 mm; d:41.28 mm; Characteristic rolling element frequency, BSF:6.7 Hz; Y0:1.04; Rating life coefficient, A2:1.9;

F:26.5 mm; Inventory:0.0; Brand:NTN; rs min:1 mm; da max:26 mm; Min operating temperature, Tmin:-20 °C; Characteristic outer ring frequency, BPF0:4.29 Hz; r1s min:0.6 mm; db min:29 mm; B:18 mm;