Thrust Bearings Assembly 2RT11207

Y1:2.69; ra max:2.5 mm; Da max:216 mm; d2:151.4 mm; Mass:10.77 kg; Dynamic load, C:808 kN; Nref:2,800 rpm; k:6 mm; e:0.25; Characteristic cage frequency, FTF:0.42 Hz;

SW:4.76 mm; S:12 mm; B1:49.3 mm; d:57.15 mm; C1:8 mm; G:3/8-24UNF; r:1.1; d1:82 mm; B:33.4 mm; C0:32.8 kN;

Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Shape:Flanged Pilot Type; Type:Bearings with Housin; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Housing Material:[Aluminum Alloy] 201; Number of Bearings:Double; Flange Shape:Square Type; RoHS:6;

Dynamic load, C:122 kN; rs min:2.1 mm; D:180 mm; Nlim (grease):2,300 rpm; Da max:169 mm; Max operating temperature, Tmax:110 °C; da max:122 mm; Brand:NTN; f0:14.4; d:100 mm;

Dynamic load, C:122 kN; rs min:2.1 mm; D:180 mm; Nlim (grease):2,300 rpm; Da max:169 mm; Max operating temperature, Tmax:110 °C; da max:122 mm; Brand:NTN; f0:14.4; d:100 mm;

Bearing Material:Stainless Steel; Seals:ZZ (Double Shield); Number of Bearings:Double; Type:Bearings with Housin; Type:Bearings with Housin; Thickness, Height Indication:T, h Selection; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double;

Shaft Size:2-7/16 in; Dimension D:9.0 in; Bearing - Housing - Seal:MSE207BRHATL; Bearing Number:MSE207BR; Tensioning Unit Type:Tension Type; Support Type:Take-Up; Series Type:Medium Series; Dimension T:12.0 in; Cr - Dynamic Load Rating:37768 lbf; Dimension V:4.5 in;

Housing Mass:10.4 Kg; Material :Cast Iron; J:260.00 mm; Housing:FSNT 517; Bolt Qty:2; Cage Type:EJ; Locating Rings (width x OD):SR150X5; A:125.00 mm; H1:95.0 mm; G:M16;

T1 - Bearing Width:1.8125 in; G2 - Heat Generation Factor (Rib-Roller End):18.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:21000 lbf; T - Bearing Width to Flange:0.9060 in; C1 - Dynamic Radial Rating (1 million revolutions)5:66900 lbf; C - Cup Width:1.1875 in; Bearing Weight:10.7 lb; a - Effective Center Location3:0.07 in; e - ISO Factor8:0.71; Series:9200;

L1:83 mm; A:72 mm; Designation of housing:P214-; L:266 mm; d:69.85 mm; A1:48 mm; T min.:-20 °C; S:30.2 mm; Recommended tightening torque for set screw:27.1 Nm; T max.:100 °C;

Dynamic load, C:122 kN; rs min:2.1 mm; D:180 mm; Nlim (grease):2,300 rpm; Da max:169 mm; Max operating temperature, Tmax:110 °C; da max:122 mm; Brand:NTN; f0:14.4; d:100 mm;

Bearing Material:Stainless Steel; Seals:ZZ (Double Shield); Number of Bearings:Double; Type:Bearings with Housin; Type:Bearings with Housin; Thickness, Height Indication:T, h Selection; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double;

Bearing Material:Stainless Steel; Seals:ZZ (Double Shield); Number of Bearings:Double; Type:Bearings with Housin; Type:Bearings with Housin; Thickness, Height Indication:T, h Selection; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double;

Dynamic load, C:122 kN; rs min:2.1 mm; D:180 mm; Nlim (grease):2,300 rpm; Da max:169 mm; Max operating temperature, Tmax:110 °C; da max:122 mm; Brand:NTN; f0:14.4; d:100 mm;

Flange O.D. H(φ):69; Bearing I.D. d(mm):20; Width T(mm):18; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Shape:Flange Type; Type:Bearings with Housin; Type:Bearings with Housin; Number of Bearings:Single;