Thrust Bearings Assembly 51124

SW:4.76 mm; S:12 mm; B1:49.3 mm; d:57.15 mm; C1:8 mm; G:3/8-24UNF; r:1.1; d1:82 mm; B:33.4 mm; C0:32.8 kN;

Flange O.D. H(φ):69; Bearing I.D. d(mm):20; Width T(mm):18; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Shape:Flange Type; Type:Bearings with Housin; Type:Bearings with Housin; Number of Bearings:Single;

Flange O.D. H(φ):69; Bearing I.D. d(mm):20; Width T(mm):18; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Shape:Flange Type; Type:Bearings with Housin; Type:Bearings with Housin; Number of Bearings:Single;

Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Shape:Flanged Pilot Type; Type:Bearings with Housin; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Housing Material:[Aluminum Alloy] 201; Number of Bearings:Double; Flange Shape:Square Type; RoHS:6;

Y1:2.69; ra max:2.5 mm; Da max:216 mm; d2:151.4 mm; Mass:10.77 kg; Dynamic load, C:808 kN; Nref:2,800 rpm; k:6 mm; e:0.25; Characteristic cage frequency, FTF:0.42 Hz;

Rolling Element Material:Bearing Steel; Fit:J7; Stroke:No; Fit:J7; Accessory:No Cover; Accessory:No Cover; Bearing Unit, Type:Irregular Shape Flan; Grease Type:Standard Grease; Diameter series symbol:Used for Light load; Surface Treatment:No;

Flange O.D. H(φ):69; Bearing I.D. d(mm):20; Width T(mm):18; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Shape:Flange Type; Type:Bearings with Housin; Type:Bearings with Housin; Number of Bearings:Single;

T1 - Bearing Width:1.8125 in; G2 - Heat Generation Factor (Rib-Roller End):18.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:21000 lbf; T - Bearing Width to Flange:0.9060 in; C1 - Dynamic Radial Rating (1 million revolutions)5:66900 lbf; C - Cup Width:1.1875 in; Bearing Weight:10.7 lb; a - Effective Center Location3:0.07 in; e - ISO Factor8:0.71; Series:9200;

d:30; Seal:No; Bearing Unit, Type:Square flange shape; Cover Type:No; Surface Treatment:No; Unit Body Material:Cast Iron; Temperature Properties:Standard; Unit Body Material:Cast Iron; Unit, Type:Bearing unit; Basic Load Rating, Dynamic Rating(N):19500;

Y1:2.69; ra max:2.5 mm; Da max:216 mm; d2:151.4 mm; Mass:10.77 kg; Dynamic load, C:808 kN; Nref:2,800 rpm; k:6 mm; e:0.25; Characteristic cage frequency, FTF:0.42 Hz;

Flange O.D. H(φ):69; Bearing I.D. d(mm):20; Width T(mm):18; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Shape:Flange Type; Type:Bearings with Housin; Type:Bearings with Housin; Number of Bearings:Single;

Characteristic cage frequency, FTF:0.47 Hz; ra max:4.8 mm; Fatigue limit load, Cu:35.3 kN; T:28.58 mm; d:146.05 mm; Y2:1.63; Brand:NTN; Min operating temperature, Tmin:-40 °C; Static load, C0:340 kN; e:0.37;

L1:83 mm; A:72 mm; Designation of housing:P214-; L:266 mm; d:69.85 mm; A1:48 mm; T min.:-20 °C; S:30.2 mm; Recommended tightening torque for set screw:27.1 Nm; T max.:100 °C;

Rolling Element Material:Bearing Steel; Fit:J7; Stroke:No; Fit:J7; Accessory:No Cover; Accessory:No Cover; Bearing Unit, Type:Irregular Shape Flan; Grease Type:Standard Grease; Diameter series symbol:Used for Light load; Surface Treatment:No;

SW:4.76 mm; S:12 mm; B1:49.3 mm; d:57.15 mm; C1:8 mm; G:3/8-24UNF; r:1.1; d1:82 mm; B:33.4 mm; C0:32.8 kN;