Thrust Bearings Assembly 29336

C:52.5 kN; C0:32.8 kN; Designation of bearing:EX212G2L3; d1:82 mm; A:48 mm; Weight:4.33 kg; T min.:-20 °C; H:250 mm; d:60 mm; A2:75.8 mm;

Flange O.D. H(φ):69; Bearing I.D. d(mm):20; Width T(mm):18; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Shape:Flange Type; Type:Bearings with Housin; Type:Bearings with Housin; Number of Bearings:Single;

Housing Material:[Aluminum Alloy] 201; Flange O.D. H(φ):38; Bearing Part Number:625; Bearing Material:[Steel] Steel; Volume Discount:Available; Volume Discount:Available; Number of Bearings:Single; Days to Ship:7 Days; Flange Shape:Round Type; Type:Bearings with Housin;

SW:4.76 mm; S:12 mm; B1:49.3 mm; d:57.15 mm; C1:8 mm; G:3/8-24UNF; r:1.1; d1:82 mm; B:33.4 mm; C0:32.8 kN;

Characteristic cage frequency, FTF:0.47 Hz; ra max:4.8 mm; Fatigue limit load, Cu:35.3 kN; T:28.58 mm; d:146.05 mm; Y2:1.63; Brand:NTN; Min operating temperature, Tmin:-40 °C; Static load, C0:340 kN; e:0.37;

T1 - Bearing Width:1.8125 in; G2 - Heat Generation Factor (Rib-Roller End):18.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:21000 lbf; T - Bearing Width to Flange:0.9060 in; C1 - Dynamic Radial Rating (1 million revolutions)5:66900 lbf; C - Cup Width:1.1875 in; Bearing Weight:10.7 lb; a - Effective Center Location3:0.07 in; e - ISO Factor8:0.71; Series:9200;

Shaft Size:2-7/16 in; Dimension D:9.0 in; Bearing - Housing - Seal:MSE207BRHATL; Bearing Number:MSE207BR; Tensioning Unit Type:Tension Type; Support Type:Take-Up; Series Type:Medium Series; Dimension T:12.0 in; Cr - Dynamic Load Rating:37768 lbf; Dimension V:4.5 in;

SW:4.76 mm; S:12 mm; B1:49.3 mm; d:57.15 mm; C1:8 mm; G:3/8-24UNF; r:1.1; d1:82 mm; B:33.4 mm; C0:32.8 kN;

Housing Mass:10.4 Kg; Material :Cast Iron; J:260.00 mm; Housing:FSNT 517; Bolt Qty:2; Cage Type:EJ; Locating Rings (width x OD):SR150X5; A:125.00 mm; H1:95.0 mm; G:M16;

SW:4.76 mm; S:12 mm; B1:49.3 mm; d:57.15 mm; C1:8 mm; G:3/8-24UNF; r:1.1; d1:82 mm; B:33.4 mm; C0:32.8 kN;

Dynamic load, C:122 kN; rs min:2.1 mm; D:180 mm; Nlim (grease):2,300 rpm; Da max:169 mm; Max operating temperature, Tmax:110 °C; da max:122 mm; Brand:NTN; f0:14.4; d:100 mm;

d:30; Seal:No; Bearing Unit, Type:Square flange shape; Cover Type:No; Surface Treatment:No; Unit Body Material:Cast Iron; Temperature Properties:Standard; Unit Body Material:Cast Iron; Unit, Type:Bearing unit; Basic Load Rating, Dynamic Rating(N):19500;

Characteristic cage frequency, FTF:0.47 Hz; ra max:4.8 mm; Fatigue limit load, Cu:35.3 kN; T:28.58 mm; d:146.05 mm; Y2:1.63; Brand:NTN; Min operating temperature, Tmin:-40 °C; Static load, C0:340 kN; e:0.37;

C:52.5 kN; C0:32.8 kN; Designation of bearing:EX212G2L3; d1:82 mm; A:48 mm; Weight:4.33 kg; T min.:-20 °C; H:250 mm; d:60 mm; A2:75.8 mm;

C:52.5 kN; C0:32.8 kN; Designation of bearing:EX212G2L3; d1:82 mm; A:48 mm; Weight:4.33 kg; T min.:-20 °C; H:250 mm; d:60 mm; A2:75.8 mm;