Thrust Bearings Assembly 51164

Housing Mass:10.4 Kg; Material :Cast Iron; J:260.00 mm; Housing:FSNT 517; Bolt Qty:2; Cage Type:EJ; Locating Rings (width x OD):SR150X5; A:125.00 mm; H1:95.0 mm; G:M16;

L1:83 mm; A:72 mm; Designation of housing:P214-; L:266 mm; d:69.85 mm; A1:48 mm; T min.:-20 °C; S:30.2 mm; Recommended tightening torque for set screw:27.1 Nm; T max.:100 °C;

Housing Mass:10.4 Kg; Material :Cast Iron; J:260.00 mm; Housing:FSNT 517; Bolt Qty:2; Cage Type:EJ; Locating Rings (width x OD):SR150X5; A:125.00 mm; H1:95.0 mm; G:M16;

Housing Mass:10.4 Kg; Material :Cast Iron; J:260.00 mm; Housing:FSNT 517; Bolt Qty:2; Cage Type:EJ; Locating Rings (width x OD):SR150X5; A:125.00 mm; H1:95.0 mm; G:M16;

Y1:2.69; ra max:2.5 mm; Da max:216 mm; d2:151.4 mm; Mass:10.77 kg; Dynamic load, C:808 kN; Nref:2,800 rpm; k:6 mm; e:0.25; Characteristic cage frequency, FTF:0.42 Hz;

d:30; Seal:No; Bearing Unit, Type:Square flange shape; Cover Type:No; Surface Treatment:No; Unit Body Material:Cast Iron; Temperature Properties:Standard; Unit Body Material:Cast Iron; Unit, Type:Bearing unit; Basic Load Rating, Dynamic Rating(N):19500;

SW:4.76 mm; S:12 mm; B1:49.3 mm; d:57.15 mm; C1:8 mm; G:3/8-24UNF; r:1.1; d1:82 mm; B:33.4 mm; C0:32.8 kN;

d:30; Seal:No; Bearing Unit, Type:Square flange shape; Cover Type:No; Surface Treatment:No; Unit Body Material:Cast Iron; Temperature Properties:Standard; Unit Body Material:Cast Iron; Unit, Type:Bearing unit; Basic Load Rating, Dynamic Rating(N):19500;

C:52.5 kN; C0:32.8 kN; Designation of bearing:EX212G2L3; d1:82 mm; A:48 mm; Weight:4.33 kg; T min.:-20 °C; H:250 mm; d:60 mm; A2:75.8 mm;

Y1:2.69; ra max:2.5 mm; Da max:216 mm; d2:151.4 mm; Mass:10.77 kg; Dynamic load, C:808 kN; Nref:2,800 rpm; k:6 mm; e:0.25; Characteristic cage frequency, FTF:0.42 Hz;

Flange O.D. H(φ):69; Bearing I.D. d(mm):20; Width T(mm):18; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Shape:Flange Type; Type:Bearings with Housin; Type:Bearings with Housin; Number of Bearings:Single;

Shaft Size:2-7/16 in; Dimension D:9.0 in; Bearing - Housing - Seal:MSE207BRHATL; Bearing Number:MSE207BR; Tensioning Unit Type:Tension Type; Support Type:Take-Up; Series Type:Medium Series; Dimension T:12.0 in; Cr - Dynamic Load Rating:37768 lbf; Dimension V:4.5 in;

C:52.5 kN; C0:32.8 kN; Designation of bearing:EX212G2L3; d1:82 mm; A:48 mm; Weight:4.33 kg; T min.:-20 °C; H:250 mm; d:60 mm; A2:75.8 mm;

Bearing Material:Stainless Steel; Seals:ZZ (Double Shield); Number of Bearings:Double; Type:Bearings with Housin; Type:Bearings with Housin; Thickness, Height Indication:T, h Selection; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double;