B17-116D Automotive Generator Bearing 17x52x18mm

s1:30.9 mm; T max.:100 °C; J:50 mm; N:M10; Weight:0.65 kg; B1:44.3 mm; C0:7.88 kN; Designation of housing:PG205N-; Z:17.5 mm; Recommended tightening torque for set screw:5.5 Nm;

Designation of open end cover:SCOU207-20; A1:31 mm; Weight:1.84 kg; H2:94 mm; N:17mm; B:42.9 mm; L:167 mm; N1:21 mm; Z:60 mm; Dz:80 mm;

Designation of open end cover:SCOU207-20; A1:31 mm; Weight:1.84 kg; H2:94 mm; N:17mm; B:42.9 mm; L:167 mm; N1:21 mm; Z:60 mm; Dz:80 mm;

A:50 mm; G:M6x1; Designation of housing:PH205-; s1:13.5 mm; T max.:100 °C; L:140 mm; B:27 mm; N1:19 mm; d:25.4 mm; Weight:1.16 kg;

Recommended tightening torque for set screw:5.5 Nm; E:16 mm; A:38 mm; B1:43.5 mm; d:17 mm; H2:64 mm; B:34 mm; Designation of housing:PG204N-; G:M6x1; A1:20 mm;

Brand:SNR; Nref:6,400 rpm; Max operating temperature, Tmax:120 °C; Da max:129 mm; rs min:2.1 mm; Min operating temperature, Tmin:-20 °C; da max:82.2 mm; B:33 mm; Characteristic outer ring frequency, BPF0:3.07 Hz; Mass:2.08 kg;

s1:30.9 mm; T max.:100 °C; J:50 mm; N:M10; Weight:0.65 kg; B1:44.3 mm; C0:7.88 kN; Designation of housing:PG205N-; Z:17.5 mm; Recommended tightening torque for set screw:5.5 Nm;

A2:24 mm; Dz:60 mm; Recommended tightening torque for set screw:3.7 Nm; L1:62 mm; C:14 kN; B:27 mm; A:32 mm; Designation of bearing:US205-16G2; H:89 mm; P:150 mm;

Support Type:Round Flange; Dimension T:31.0 in; Bolt Size:8 x M30; Bearing UPC:013992034601; Dimension P:1.6 in; Cr - Dynamic Load Rating:356772 lbf; Cor - Static Load Rating:594395 lbf; Dimension H:6.4 in; Bearing Number:MSM300BX; Bearing Type:Split Cylindrical Ex;

A2:24 mm; Dz:60 mm; Recommended tightening torque for set screw:3.7 Nm; L1:62 mm; C:14 kN; B:27 mm; A:32 mm; Designation of bearing:US205-16G2; H:89 mm; P:150 mm;

Height Indication:Height Selection; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):8; Bearing Part Number:608; Housing Material:304 Stainless Steel; Number of Bearings:Single; Height H(mm):20 ～ 30; Type:Bearings with Housin; Width T(mm):12;

Recommended tightening torque for set screw:5.5 Nm; E:16 mm; A:38 mm; B1:43.5 mm; d:17 mm; H2:64 mm; B:34 mm; Designation of housing:PG204N-; G:M6x1; A1:20 mm;

A2:24 mm; Dz:60 mm; Recommended tightening torque for set screw:3.7 Nm; L1:62 mm; C:14 kN; B:27 mm; A:32 mm; Designation of bearing:US205-16G2; H:89 mm; P:150 mm;

Designation of open end cover:SCOU207-20; A1:31 mm; Weight:1.84 kg; H2:94 mm; N:17mm; B:42.9 mm; L:167 mm; N1:21 mm; Z:60 mm; Dz:80 mm;

A:50 mm; G:M6x1; Designation of housing:PH205-; s1:13.5 mm; T max.:100 °C; L:140 mm; B:27 mm; N1:19 mm; d:25.4 mm; Weight:1.16 kg;