cylindrical bearing nomenclature SLX55X140X81 NTN

Rolling Element Material:Bearing Steel; Machining:No; Unit, Type:Insert Bearing Unit; Stroke:No; RoHS:6; Pillow Type, Category:Standard; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; Stroke:No; Rolling Element Material:Bearing Steel;

Bolt Qty:4; G:M16; End Cover2:EC518-615; N:18 mm; Max Grease Speed:3600; L:345.00 mm; Locating Rings (width x OD):SR160X14; Locknut:KM15; H:194 mm; Seal Type:Double Lip;

C:52.5 kN; L:138 mm; B:65.1 mm; Weight:3.77 kg; Dz:120 mm; A2:70.7 mm; Designation of housing:FLE212N-; G:R1/8"; A:50.4 mm; C0:32.8 kN;

C:52.5 kN; L:138 mm; B:65.1 mm; Weight:3.77 kg; Dz:120 mm; A2:70.7 mm; Designation of housing:FLE212N-; G:R1/8"; A:50.4 mm; C0:32.8 kN;

N:19mm; d:50.8 mm; Designation of housing:FL211N-; S:22.2 mm; A:43 mm; G:M6x1; J:184 mm; Recommended tightening torque for set screw:16.8 Nm; C0:29.2 kN; L:130 mm;

Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; L1:72 mm; C:19.5 kN; A2:40 mm; G1:M24; L:114 mm; T min.:-20 °C; A:32 mm; Designation of housing:EHE206-;

C0:20.8 kN; S:21.4 mm; Designation of open end cover:SCOE209-45; T max.:100 °C; d:45 mm; d1:62 mm; e:10 mm; Dz:95 mm; H3:105; A4:26 mm;

Accessory:No Cover; Pillow Type, Category:Standard; B:69.8; Unit, Type:Insert Bearing Unit; Pillow Type, Category:Standard; Unit Body Material:Cast Iron; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):52400; Diameter series symbol:Used for Light load; Machining:Oil-free type;

C0:20.8 kN; S:21.4 mm; Designation of open end cover:SCOE209-45; T max.:100 °C; d:45 mm; d1:62 mm; e:10 mm; Dz:95 mm; H3:105; A4:26 mm;

J1:51 mm; S:7.5 mm; d:22.22 mm; Designation of open end cover:SCOU205-14; s1:13.5 mm; L:68 mm; Weight:0.61 kg; T min.:-40 °C; H:125 mm; Designation of housing:FA205N-;

Characteristic inner ring frequency, BPFI:11.33 Hz; Ce min:28 mm; Characteristic cage frequency, FTF:0.43 Hz; B:130 mm; Y0:2.51; Da max:480 mm; Nref:1,000 rpm; Number of lubrication holes:8; Associated sleeve reference:H3156; d2:355 mm;

Rolling Element Material:Bearing Steel; Machining:No; Unit, Type:Insert Bearing Unit; Stroke:No; RoHS:6; Pillow Type, Category:Standard; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; Stroke:No; Rolling Element Material:Bearing Steel;

Type:Bearings with Housin; Seals:DD (Contact Rubber S; Days to Ship:8 Days; C Chamfered:Not Provided; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6902; Bearing Retained:Yes (with retaining; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea;

Bolt Qty:4; G:M16; End Cover2:EC518-615; N:18 mm; Max Grease Speed:3600; L:345.00 mm; Locating Rings (width x OD):SR160X14; Locknut:KM15; H:194 mm; Seal Type:Double Lip;

J1:51 mm; S:7.5 mm; d:22.22 mm; Designation of open end cover:SCOU205-14; s1:13.5 mm; L:68 mm; Weight:0.61 kg; T min.:-40 °C; H:125 mm; Designation of housing:FA205N-;