cylindrical bearing nomenclature TRU 7510845 IKO

Designation of bearing:EX315-48G2T20; Designation of housing:F315-; A:66 mm; Weight:11.28 kg; J:184 mm; B1:100 mm; s1:69.1 mm; d:76.2 mm; N:25mm; C0:76.8 kN;

Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Shape:Flanged Pilot Type; Shape:Flanged Pilot Type; Volume Discount:Available; Days to Ship:7 Days; Flange Shape:Square Type; RoHS:6; Number of Bearings:Double;

Number of Raceway Ring Rows:Single Row; Retainer Type:No; Seal, Shield Symbols:DDU; Low Torque Specification:No; Outer Ring Shape:Flat; Precision:Grade 0; O.D.(Ø):42; Size Standards:Metric System; Load Direction:Radial; Holder Symbol:No;

Accessory:No Cover; Pillow Type, Category:Standard; B:69.8; Unit, Type:Insert Bearing Unit; Pillow Type, Category:Standard; Unit Body Material:Cast Iron; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):52400; Diameter series symbol:Used for Light load; Machining:Oil-free type;

Characteristic inner ring frequency, BPFI:11.33 Hz; Ce min:28 mm; Characteristic cage frequency, FTF:0.43 Hz; B:130 mm; Y0:2.51; Da max:480 mm; Nref:1,000 rpm; Number of lubrication holes:8; Associated sleeve reference:H3156; d2:355 mm;

Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; L1:72 mm; C:19.5 kN; A2:40 mm; G1:M24; L:114 mm; T min.:-20 °C; A:32 mm; Designation of housing:EHE206-;

Characteristic inner ring frequency, BPFI:11.33 Hz; Ce min:28 mm; Characteristic cage frequency, FTF:0.43 Hz; B:130 mm; Y0:2.51; Da max:480 mm; Nref:1,000 rpm; Number of lubrication holes:8; Associated sleeve reference:H3156; d2:355 mm;

Days to Ship:9 Days; Heat Resistant Characteristics:Standard; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; Surface Treatment:No; Lubrication method:Oil Supply Type; Unit Body Material:Cast Iron; Basic Dynamic Load Rating Cr(N):205000; Pillow Type, Category:Standard; d:100;

J1:51 mm; S:7.5 mm; d:22.22 mm; Designation of open end cover:SCOU205-14; s1:13.5 mm; L:68 mm; Weight:0.61 kg; T min.:-40 °C; H:125 mm; Designation of housing:FA205N-;

Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; L1:72 mm; C:19.5 kN; A2:40 mm; G1:M24; L:114 mm; T min.:-20 °C; A:32 mm; Designation of housing:EHE206-;

Designation of bearing:EX315-48G2T20; Designation of housing:F315-; A:66 mm; Weight:11.28 kg; J:184 mm; B1:100 mm; s1:69.1 mm; d:76.2 mm; N:25mm; C0:76.8 kN;

Type:Bearings with Housin; Seals:DD (Contact Rubber S; Days to Ship:8 Days; C Chamfered:Not Provided; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6902; Bearing Retained:Yes (with retaining; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea;

J1:51 mm; S:7.5 mm; d:22.22 mm; Designation of open end cover:SCOU205-14; s1:13.5 mm; L:68 mm; Weight:0.61 kg; T min.:-40 °C; H:125 mm; Designation of housing:FA205N-;

Type:Bearings with Housin; Seals:DD (Contact Rubber S; Days to Ship:8 Days; C Chamfered:Not Provided; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6902; Bearing Retained:Yes (with retaining; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea;

Bolt Qty:4; G:M16; End Cover2:EC518-615; N:18 mm; Max Grease Speed:3600; L:345.00 mm; Locating Rings (width x OD):SR160X14; Locknut:KM15; H:194 mm; Seal Type:Double Lip;