cylindrical bearing nomenclature ZSL192319-TB INA

J1:51 mm; S:7.5 mm; d:22.22 mm; Designation of open end cover:SCOU205-14; s1:13.5 mm; L:68 mm; Weight:0.61 kg; T min.:-40 °C; H:125 mm; Designation of housing:FA205N-;

C0:20.8 kN; S:21.4 mm; Designation of open end cover:SCOE209-45; T max.:100 °C; d:45 mm; d1:62 mm; e:10 mm; Dz:95 mm; H3:105; A4:26 mm;

Recommended tightening torque for set screw:5.5 Nm; Weight:0.63 kg; Designation of housing:FA204N-; C0:6.65 kN; d:12 mm; e:15 mm; Dz:54 mm; d1:32.4 mm; A1:12 mm; S:17 mm;

C:52.5 kN; L:138 mm; B:65.1 mm; Weight:3.77 kg; Dz:120 mm; A2:70.7 mm; Designation of housing:FLE212N-; G:R1/8"; A:50.4 mm; C0:32.8 kN;

Accessory:No Cover; Pillow Type, Category:Standard; B:69.8; Unit, Type:Insert Bearing Unit; Pillow Type, Category:Standard; Unit Body Material:Cast Iron; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):52400; Diameter series symbol:Used for Light load; Machining:Oil-free type;

C0:20.8 kN; S:21.4 mm; Designation of open end cover:SCOE209-45; T max.:100 °C; d:45 mm; d1:62 mm; e:10 mm; Dz:95 mm; H3:105; A4:26 mm;

Designation of bearing:EX315-48G2T20; Designation of housing:F315-; A:66 mm; Weight:11.28 kg; J:184 mm; B1:100 mm; s1:69.1 mm; d:76.2 mm; N:25mm; C0:76.8 kN;

J1:51 mm; S:7.5 mm; d:22.22 mm; Designation of open end cover:SCOU205-14; s1:13.5 mm; L:68 mm; Weight:0.61 kg; T min.:-40 °C; H:125 mm; Designation of housing:FA205N-;

Number of Raceway Ring Rows:Single Row; Retainer Type:No; Seal, Shield Symbols:DDU; Low Torque Specification:No; Outer Ring Shape:Flat; Precision:Grade 0; O.D.(Ø):42; Size Standards:Metric System; Load Direction:Radial; Holder Symbol:No;

Bolt Qty:4; G:M16; End Cover2:EC518-615; N:18 mm; Max Grease Speed:3600; L:345.00 mm; Locating Rings (width x OD):SR160X14; Locknut:KM15; H:194 mm; Seal Type:Double Lip;

C0:20.8 kN; S:21.4 mm; Designation of open end cover:SCOE209-45; T max.:100 °C; d:45 mm; d1:62 mm; e:10 mm; Dz:95 mm; H3:105; A4:26 mm;

C0:20.8 kN; S:21.4 mm; Designation of open end cover:SCOE209-45; T max.:100 °C; d:45 mm; d1:62 mm; e:10 mm; Dz:95 mm; H3:105; A4:26 mm;

Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Shape:Flanged Pilot Type; Shape:Flanged Pilot Type; Volume Discount:Available; Days to Ship:7 Days; Flange Shape:Square Type; RoHS:6; Number of Bearings:Double;

Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; L1:72 mm; C:19.5 kN; A2:40 mm; G1:M24; L:114 mm; T min.:-20 °C; A:32 mm; Designation of housing:EHE206-;