Roll Bearings for Mills NSK 2SL180-2UPA

A2:38.7 mm; H:124 mm; T max.:100 °C; d:22.22 mm; A1:11 mm; S:14.3 mm; Weight:0.61 kg; J:99 mm; C0:7.88 kN; G:R1/8";

C0:63.8 kN; C:83.2 kN; SW:5.56 mm; S:34.1 mm; T max.:200 °C; Weight:3.32 kg; Recommended tightening torque for set screw:27.1 Nm; B:85.7 mm; d:82.55 mm; T min.:-20 °C;

Seal, Shield Symbols:LLB; Types:16**/6*** series; Type:Ball; Size Standards:Metric System; Basic Dynamic Load Rating(N):4000; Precision:Grade 0; Outer Ring Shape:Flat; Grease symbol:/2AS; D:32; Retainer Type:Punching;

L:130 mm; s1:42.9 mm; A1:32 mm; G:M6x1; C0:23.2 kN; C:35.1 kN; E:25 mm; H2:116 mm; d1:67.2 mm; Designation of bearing:EX210G2;

Ca max:5.74 mm; Characteristic rolling element frequency, BSF:4.07 Hz; maximum rpm:7500 RPM; maximum rpm (grease):6400 rpm; Min operating temperature, Tmin:-60 °C; Outside Diameter:4.331 Inch | 110 Mil; Outer Race Width:1.063 Inch | 27 Mill; ra max:2 mm; d:50 mm; Internal Special Features:No;

Shape:Flange Type; Days to Ship:7 Days; Seals:ZZ (Double Shield); Bearing Part Number:6902; Volume Discount:Available; Volume Discount:Available; Shape:Flange Type; Bearing Material:Stainless Steel; Flange O.D. H(φ):57; Type:Bearings with Housin;

Ca max:5.74 mm; Characteristic rolling element frequency, BSF:4.07 Hz; maximum rpm:7500 RPM; maximum rpm (grease):6400 rpm; Min operating temperature, Tmin:-60 °C; Outside Diameter:4.331 Inch | 110 Mil; Outer Race Width:1.063 Inch | 27 Mill; ra max:2 mm; d:50 mm; Internal Special Features:No;

Design Units:Imperial; Cone Part Number:2559; D:66.421 mm; d:30.163 mm; e - ISO Factor8:0.27; Da - Cup Frontface Backing Diameter:62.99 mm; C - Cup Width:20.638 mm; B - Cone Width:25.357 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2280 lbf; Db - Cup Backface Backing Diameter:59.94 mm;

Seal Type:Viton Single Lip; Dimension H:2.9 in; Bolt Size:4 x M12; Dimension V:0.1 in; Bearing Number:MSE203BR; Bearing - Housing - Seal UPC:013992074201; Dimension R:9.5 in; Dimension T:11.3 in; Note:This product line wa; Ca - Axial Load Rating:1978 lbf;

A2:38.7 mm; H:124 mm; T max.:100 °C; d:22.22 mm; A1:11 mm; S:14.3 mm; Weight:0.61 kg; J:99 mm; C0:7.88 kN; G:R1/8";

Fit:J7; Basic Load Rating, Static Rating(N):21300; d:45; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Diameter series symbol:Used for Light load; Basic Load Rating, Dynamic Rating(N):34100; Unit Body Material:Cast Iron; Surface Treatment:No;

Shape:Flange Type; Days to Ship:7 Days; Seals:ZZ (Double Shield); Bearing Part Number:6902; Volume Discount:Available; Volume Discount:Available; Shape:Flange Type; Bearing Material:Stainless Steel; Flange O.D. H(φ):57; Type:Bearings with Housin;

R - Inner Ring To Clear Radius2:2.0 mm; do - Ball Diameter:26.98750 mm; Contact Angle:25 º; Da - Outer Ring Backing Diameter:242.700 mm; Limiting Speed (Grease):4400 rpm; Design Units:METRIC; Limiting Speed (Oil):8800 rpm; Full Timken Part Number:3MM9134WICRDUH; Ce - Dynamic Radial Rating1:221000 N; Cage Type:CR - Phenolic Outer;

C0:63.8 kN; C:83.2 kN; SW:5.56 mm; S:34.1 mm; T max.:200 °C; Weight:3.32 kg; Recommended tightening torque for set screw:27.1 Nm; B:85.7 mm; d:82.55 mm; T min.:-20 °C;

A:120 mm; L3:200 mm; T max.:100 °C; L1:210 mm; L:345 mm; N1:48 mm; B1:128.6 mm; B:100 mm; Weight:32.4 kg; N:59mm;