Double outer double row bearings 260TDI400-1

Shape:T-Shaped; Number of Bearings:Double; Bearing Retained:No; Thickness, Height Indication:T, h Configurable; Bearing I.D. d(mm):8; Type:Bearings with Housin; Type:Bearings with Housin; Bearing Part Number:628; Thickness T(mm):22 ～ 34; Lateral Width L(mm):56;

Minimum Buy Quantity:N/A; Precision Class:ABEC 1 | ISO P0; Characteristic outer ring frequency, BPF0:2.04 Hz; Da max:55.5 mm; Weight / Kilogram:0.264; Mass:0.27 kg; Inner Race Width:0 Inch | 0 Millimete; Rolling Element:Ball Bearing; Maximum Capacity / Filling Slot:No; Harmonized Tariff Code:8482.10.50.68;

Accessory:No Cover; Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; Fit:J7; d:60; Bearing Unit, Type:Square flange shape; Machining:No; Seal:Silicone; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;

H:14.5625 in; Full Timken Part Number:SAF226284-13/16; E:20.5000 in; Adapter Assembly Number1:SNW-128 x 4-13/16; Diameter S-1:4 13/16 in; B:24.75 in; E Max.:21.6250 in; E Min.:19.3750 in; Assembly Weight:310.000 lb; Bolt Hole Length:2.125 in;

C1:4.3 mm; r:0.6; d:23.81 mm; B:34 mm; m:5.5 mm; T max.:100 °C; S:14.3 mm; Weight:0.21 kg; SW:3.18 mm; C:17 mm;

Bearing Retained:Yes (with retaining; Shape:Flange Type; Width T(mm):35 ～ 70; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Part Number:6904; Shape:Flange Type; Number of Bearings:Double; Type:Bearings with Housin;

Bearing Retained:Yes (with retaining; Shape:Flange Type; Width T(mm):35 ～ 70; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Part Number:6904; Shape:Flange Type; Number of Bearings:Double; Type:Bearings with Housin;

Height H(mm):15 ～ 30; Bearing I.D. d(mm):8; Bearing Material:[Steel] Steel; Lateral Width L(mm):53; RoHS:6; Bearing Retained:No; Thickness, Height Indication:T Selection, h Confi; C Chamfered:Provided; Holder Surface Treatment:Electroless Nickel P; Housing Material:1045 Carbon Steel;

Rolling Element Material:Steel; Raceway Ring Shape:Self-aligning roller; D:160; Revolution Frequency(rpm):2700; Size Standards:Metric System; Outer Ring Type:Flat; Retainer Type:Momi removing; Size Standards:Metric System; Series:Type 213; RoHS:6;

Height H(mm):15 ～ 30; Bearing I.D. d(mm):8; Bearing Material:[Steel] Steel; Lateral Width L(mm):53; RoHS:6; Bearing Retained:No; Thickness, Height Indication:T Selection, h Confi; C Chamfered:Provided; Holder Surface Treatment:Electroless Nickel P; Housing Material:1045 Carbon Steel;

Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Part Number:6204; Holder Surface Treatment:Clear Anodize; Lateral Width L(mm):88; Thickness T(mm):45 ～ 50; Bearing Retained:No; Bearing I.D. d(mm):20; Number of Bearings:Double;

Height H(mm):15 ～ 30; Bearing I.D. d(mm):8; Bearing Material:[Steel] Steel; Lateral Width L(mm):53; RoHS:6; Bearing Retained:No; Thickness, Height Indication:T Selection, h Confi; C Chamfered:Provided; Holder Surface Treatment:Electroless Nickel P; Housing Material:1045 Carbon Steel;

d - Bore Diameter:3.8750 in; Oil Holes in Retainer:No; B:0.7650 in; D - Bearing O.D.:5.0000 in; Weight:1.1 lb; Bearing Type:Thrust Tapered Rolle; R - Fillet Radius Shaft (Max):0.03 in; Steering Pivot Rating:9700 lbf;

Shape:T-Shaped; Number of Bearings:Double; Bearing Retained:No; Thickness, Height Indication:T, h Configurable; Bearing I.D. d(mm):8; Type:Bearings with Housin; Type:Bearings with Housin; Bearing Part Number:628; Thickness T(mm):22 ～ 34; Lateral Width L(mm):56;

Number of Bearings:Single; Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):77; Shape:Flange Type; Volume Discount:Available; Flange Shape:Compact Type; Seals:ZZ (Double Shield); Bearing Retained:Yes (with retaining; Width T(mm):18;