Double outer double row bearings 340TDI580-1

Bearing Material:Stainless Steel; Width T(mm):14; Shape:Flange Type; Holder Surface Treatment:Clear Anodize; Bearing I.D. d(mm):15; Volume Discount:Available; Number of Bearings:Single; Flange O.D. H(φ):60; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single;

Bearing Material:Stainless Steel; Width T(mm):14; Shape:Flange Type; Holder Surface Treatment:Clear Anodize; Bearing I.D. d(mm):15; Volume Discount:Available; Number of Bearings:Single; Flange O.D. H(φ):60; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single;

Static load, C0:4.6 kN; ra max:0.6 mm; Nlim (grease):12,000 rpm; Dynamic load, C:9.6 kN; da min:21 mm; Max operating temperature, Tmax:110 °C; f0:12.8; Mass:0.07 kg; Characteristic rolling element frequency, BSF:3.78 Hz; Radial clearance class:C3;

Height H(mm):15 ～ 30; Bearing I.D. d(mm):8; Bearing Material:[Steel] Steel; Lateral Width L(mm):53; RoHS:6; Bearing Retained:No; Thickness, Height Indication:T Selection, h Confi; C Chamfered:Provided; Holder Surface Treatment:Electroless Nickel P; Housing Material:1045 Carbon Steel;

Accessory:No Cover; Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; Fit:J7; d:60; Bearing Unit, Type:Square flange shape; Machining:No; Seal:Silicone; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;

Static load, C0:4.6 kN; ra max:0.6 mm; Nlim (grease):12,000 rpm; Dynamic load, C:9.6 kN; da min:21 mm; Max operating temperature, Tmax:110 °C; f0:12.8; Mass:0.07 kg; Characteristic rolling element frequency, BSF:3.78 Hz; Radial clearance class:C3;

Load Direction:Radial; Low Torque Specification:No; Rolling Element Material:[Steel] Steel; Internal Symbol:No; Rubugado Symbol:No; Torque Symbol:No; d:20; Basic Load Rating, Static Rating(N):2470; Spacer, Sleeve symbol:No; Low Torque Specification:No;

Static load, C0:4.6 kN; ra max:0.6 mm; Nlim (grease):12,000 rpm; Dynamic load, C:9.6 kN; da min:21 mm; Max operating temperature, Tmax:110 °C; f0:12.8; Mass:0.07 kg; Characteristic rolling element frequency, BSF:3.78 Hz; Radial clearance class:C3;

Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Part Number:6204; Holder Surface Treatment:Clear Anodize; Lateral Width L(mm):88; Thickness T(mm):45 ～ 50; Bearing Retained:No; Bearing I.D. d(mm):20; Number of Bearings:Double;

Bearing Material:Stainless Steel; Width T(mm):14; Shape:Flange Type; Holder Surface Treatment:Clear Anodize; Bearing I.D. d(mm):15; Volume Discount:Available; Number of Bearings:Single; Flange O.D. H(φ):60; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single;

Static load, C0:4.6 kN; ra max:0.6 mm; Nlim (grease):12,000 rpm; Dynamic load, C:9.6 kN; da min:21 mm; Max operating temperature, Tmax:110 °C; f0:12.8; Mass:0.07 kg; Characteristic rolling element frequency, BSF:3.78 Hz; Radial clearance class:C3;

d - Bore Diameter:3.8750 in; Oil Holes in Retainer:No; B:0.7650 in; D - Bearing O.D.:5.0000 in; Weight:1.1 lb; Bearing Type:Thrust Tapered Rolle; R - Fillet Radius Shaft (Max):0.03 in; Steering Pivot Rating:9700 lbf;

Load Direction:Radial; Low Torque Specification:No; Rolling Element Material:[Steel] Steel; Internal Symbol:No; Rubugado Symbol:No; Torque Symbol:No; d:20; Basic Load Rating, Static Rating(N):2470; Spacer, Sleeve symbol:No; Low Torque Specification:No;

d - Bore Diameter:3.8750 in; Oil Holes in Retainer:No; B:0.7650 in; D - Bearing O.D.:5.0000 in; Weight:1.1 lb; Bearing Type:Thrust Tapered Rolle; R - Fillet Radius Shaft (Max):0.03 in; Steering Pivot Rating:9700 lbf;

Bearing Retained:Yes (with retaining; Shape:Flange Type; Width T(mm):35 ～ 70; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Part Number:6904; Shape:Flange Type; Number of Bearings:Double; Type:Bearings with Housin;