Double outer double row bearings 130TDI190-2

Rolling Element Material:Steel; Raceway Ring Shape:Self-aligning roller; D:160; Revolution Frequency(rpm):2700; Size Standards:Metric System; Outer Ring Type:Flat; Retainer Type:Momi removing; Size Standards:Metric System; Series:Type 213; RoHS:6;

Load Direction:Radial; Low Torque Specification:No; Rolling Element Material:[Steel] Steel; Internal Symbol:No; Rubugado Symbol:No; Torque Symbol:No; d:20; Basic Load Rating, Static Rating(N):2470; Spacer, Sleeve symbol:No; Low Torque Specification:No;

C1:4.3 mm; r:0.6; d:23.81 mm; B:34 mm; m:5.5 mm; T max.:100 °C; S:14.3 mm; Weight:0.21 kg; SW:3.18 mm; C:17 mm;

Minimum Buy Quantity:N/A; Precision Class:ABEC 1 | ISO P0; Characteristic outer ring frequency, BPF0:2.04 Hz; Da max:55.5 mm; Weight / Kilogram:0.264; Mass:0.27 kg; Inner Race Width:0 Inch | 0 Millimete; Rolling Element:Ball Bearing; Maximum Capacity / Filling Slot:No; Harmonized Tariff Code:8482.10.50.68;

Minimum Buy Quantity:N/A; Precision Class:ABEC 1 | ISO P0; Characteristic outer ring frequency, BPF0:2.04 Hz; Da max:55.5 mm; Weight / Kilogram:0.264; Mass:0.27 kg; Inner Race Width:0 Inch | 0 Millimete; Rolling Element:Ball Bearing; Maximum Capacity / Filling Slot:No; Harmonized Tariff Code:8482.10.50.68;

Number of Bearings:Single; Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):77; Shape:Flange Type; Volume Discount:Available; Flange Shape:Compact Type; Seals:ZZ (Double Shield); Bearing Retained:Yes (with retaining; Width T(mm):18;

Static load, C0:4.6 kN; ra max:0.6 mm; Nlim (grease):12,000 rpm; Dynamic load, C:9.6 kN; da min:21 mm; Max operating temperature, Tmax:110 °C; f0:12.8; Mass:0.07 kg; Characteristic rolling element frequency, BSF:3.78 Hz; Radial clearance class:C3;

Height H(mm):15 ～ 30; Bearing I.D. d(mm):8; Bearing Material:[Steel] Steel; Lateral Width L(mm):53; RoHS:6; Bearing Retained:No; Thickness, Height Indication:T Selection, h Confi; C Chamfered:Provided; Holder Surface Treatment:Electroless Nickel P; Housing Material:1045 Carbon Steel;

C1:4.3 mm; r:0.6; d:23.81 mm; B:34 mm; m:5.5 mm; T max.:100 °C; S:14.3 mm; Weight:0.21 kg; SW:3.18 mm; C:17 mm;

C0:23.2 kN; G:M6x1; L3:86 mm; Z:90 mm; S:24.6 mm; B1:62.7 mm; Designation of housing:T210N-; B:49.2 mm; T max.:100 °C; Weight:2.72 kg;

Rolling Element Material:Steel; Raceway Ring Shape:Self-aligning roller; D:160; Revolution Frequency(rpm):2700; Size Standards:Metric System; Outer Ring Type:Flat; Retainer Type:Momi removing; Size Standards:Metric System; Series:Type 213; RoHS:6;

Bearing Retained:Yes (with retaining; Shape:Flange Type; Width T(mm):35 ～ 70; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Part Number:6904; Shape:Flange Type; Number of Bearings:Double; Type:Bearings with Housin;

Bearing Retained:Yes (with retaining; Shape:Flange Type; Width T(mm):35 ～ 70; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Part Number:6904; Shape:Flange Type; Number of Bearings:Double; Type:Bearings with Housin;

H:14.5625 in; Full Timken Part Number:SAF226284-13/16; E:20.5000 in; Adapter Assembly Number1:SNW-128 x 4-13/16; Diameter S-1:4 13/16 in; B:24.75 in; E Max.:21.6250 in; E Min.:19.3750 in; Assembly Weight:310.000 lb; Bolt Hole Length:2.125 in;

Accessory:No Cover; Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; Fit:J7; d:60; Bearing Unit, Type:Square flange shape; Machining:No; Seal:Silicone; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;