Double outer double row bearings 400TDI730-1

Static load, C0:4.6 kN; ra max:0.6 mm; Nlim (grease):12,000 rpm; Dynamic load, C:9.6 kN; da min:21 mm; Max operating temperature, Tmax:110 °C; f0:12.8; Mass:0.07 kg; Characteristic rolling element frequency, BSF:3.78 Hz; Radial clearance class:C3;

Load Direction:Radial; Low Torque Specification:No; Rolling Element Material:[Steel] Steel; Internal Symbol:No; Rubugado Symbol:No; Torque Symbol:No; d:20; Basic Load Rating, Static Rating(N):2470; Spacer, Sleeve symbol:No; Low Torque Specification:No;

H:14.5625 in; Full Timken Part Number:SAF226284-13/16; E:20.5000 in; Adapter Assembly Number1:SNW-128 x 4-13/16; Diameter S-1:4 13/16 in; B:24.75 in; E Max.:21.6250 in; E Min.:19.3750 in; Assembly Weight:310.000 lb; Bolt Hole Length:2.125 in;

C1:4.3 mm; r:0.6; d:23.81 mm; B:34 mm; m:5.5 mm; T max.:100 °C; S:14.3 mm; Weight:0.21 kg; SW:3.18 mm; C:17 mm;

Bearing Retained:Yes (with retaining; Shape:Flange Type; Width T(mm):35 ～ 70; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Part Number:6904; Shape:Flange Type; Number of Bearings:Double; Type:Bearings with Housin;

C0:23.2 kN; G:M6x1; L3:86 mm; Z:90 mm; S:24.6 mm; B1:62.7 mm; Designation of housing:T210N-; B:49.2 mm; T max.:100 °C; Weight:2.72 kg;

Accessory:No Cover; Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; Fit:J7; d:60; Bearing Unit, Type:Square flange shape; Machining:No; Seal:Silicone; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;

H:14.5625 in; Full Timken Part Number:SAF226284-13/16; E:20.5000 in; Adapter Assembly Number1:SNW-128 x 4-13/16; Diameter S-1:4 13/16 in; B:24.75 in; E Max.:21.6250 in; E Min.:19.3750 in; Assembly Weight:310.000 lb; Bolt Hole Length:2.125 in;

Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Part Number:6204; Holder Surface Treatment:Clear Anodize; Lateral Width L(mm):88; Thickness T(mm):45 ～ 50; Bearing Retained:No; Bearing I.D. d(mm):20; Number of Bearings:Double;

C0:23.2 kN; G:M6x1; L3:86 mm; Z:90 mm; S:24.6 mm; B1:62.7 mm; Designation of housing:T210N-; B:49.2 mm; T max.:100 °C; Weight:2.72 kg;

H:14.5625 in; Full Timken Part Number:SAF226284-13/16; E:20.5000 in; Adapter Assembly Number1:SNW-128 x 4-13/16; Diameter S-1:4 13/16 in; B:24.75 in; E Max.:21.6250 in; E Min.:19.3750 in; Assembly Weight:310.000 lb; Bolt Hole Length:2.125 in;

Accessory:No Cover; Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; Fit:J7; d:60; Bearing Unit, Type:Square flange shape; Machining:No; Seal:Silicone; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;

Height H(mm):15 ～ 30; Bearing I.D. d(mm):8; Bearing Material:[Steel] Steel; Lateral Width L(mm):53; RoHS:6; Bearing Retained:No; Thickness, Height Indication:T Selection, h Confi; C Chamfered:Provided; Holder Surface Treatment:Electroless Nickel P; Housing Material:1045 Carbon Steel;

Accessory:No Cover; Bearing Inner Dia. Shape:Tapered hole adapter; Unit Body Material:Cast Iron; Fit:J7; d:60; Bearing Unit, Type:Square flange shape; Machining:No; Seal:Silicone; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Square flange shape;